In-Line Repairable R-SERIES

Remington Valve's "R SERIES" In-Line repairable valve. 

For all Power, Refining, Chemical, and Petro-Chemical applications where metal seated, with long term tight shut-off capable Severe Service Ball Valves are required. Remington's R Series can be rebuilt without cutting the welds, re-welding in new or repaired valves, and then stress relieving. The R Series valve center section is removable and repairable.  There's no need to remove actuation, packing, stems, just spread valve apart 1/8 of an inch and the center section is easily removed for access to ball and seat sets. Replace ball and seat sets, insert new gaskets, torque body bolts, and the valve is ready for operation again!

    SIZE

     ½” – 24” (3 piece design)

    PRESSURE CLASS

     150# - 4500#

    CENTER SECTION MATERIALS

    • A105, F11, F22, F316, F91, F92

    All ASME B16.34 materials available

    END CONNECTIONS

    • SW Standard (BW, HUB, FNPT, RFF, RTJ)

    • A105, F11, F22, F316, F91, F92

    All ASME B16.34 materials available

    SEALING OPTIONS

    • Uni-directional (Standard)

    • Bi-directional

    R-SERIES ADVANTAGES

    • Serviceable in-line

    • Saves significant money & time

    • Repairable without cutting the installation welds

    • Eliminates further Post Weld Heat Treat (PWHT)